접기
[ 0.000000] Linux version 2.6.32.12 ( root@image15 ) (gcc version 4.2.1) #1336 Sat Sep 18 16:56:37 CST 2010
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Feroceon-KW
[ 0.000000] Using UBoot passing parameters structure
[ 0.000000] Sys Clk = 200000000, Tclk = 166666667
[ 0.000000] Synology Board ID: 22
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c03c40cc, node_mem_map c041a000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 initrd=0x1400040 root=/dev/synoboot1 rootdelay=10 syno_hw_version=DS011jr0 netif_num=1 mac1=***** mac2=***** sn=*****
[ 0.000000] Synology Hareware Version: DS011jr0-j
[ 0.000000] Internal netif num: 1
[ 0.000000] Mac1: ********
[ 0.000000] Mac2: ********
[ 0.000000] Serial Number: ********
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 124912KB available (3376K code, 456K data, 112K init, 0K highmem)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:128
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Calibrating delay loop... 794.62 BogoMIPS (lpj=3973120)
[ 0.230000] Mount-cache hash table entries: 512
[ 0.230000] CPU: Testing write buffer coherency: ok
[ 0.230000] NET: Registered protocol family 16
[ 0.230000] Feroceon L2: Enabling L2
[ 0.230000] Feroceon L2: Cache support initialised.
[ 0.230000]
[ 0.230000] CPU Interface
[ 0.230000] -------------
[ 0.230000] SDRAM_CS0 ....base 00000000, size 128MB
[ 0.230000] SDRAM_CS1 ....disable
[ 0.230000] SDRAM_CS2 ....disable
[ 0.230000] SDRAM_CS3 ....disable
[ 0.230000] PEX0_MEM ....base e0000000, size 128MB
[ 0.230000] PEX0_IO ....base f2000000, size 1MB
[ 0.230000] PEX1_MEM ....no such
[ 0.230000] PEX1_IO ....no such
[ 0.230000] INTER_REGS ....base f1000000, size 1MB
[ 0.230000] NFLASH_CS ....no such
[ 0.230000] SPI_CS ....no such
[ 0.230000] BOOT_ROM_CS ....no such
[ 0.230000] DEV_BOOTCS ....no such
[ 0.230000] CRYPT_ENG ....base fb000000, size 64KB
[ 0.230000] Detected Tclk 166666667 and SysClk 200000000
[ 0.230000] Synology 6180 GPIO Init
[ 0.730000] PEX0 interface detected no Link.
[ 0.730000] PCI: bus0: Fast back to back transfers enabled
[ 0.730000] mvPexLocalBusNumSet: ERR. Invalid PEX interface 1
[ 0.740000] bio: create slab <bio-0> at 0
[ 0.740000] vgaarb: loaded
[ 0.740000] SCSI subsystem initialized
[ 0.740000] usbcore: registered new interface driver usbfs
[ 0.740000] usbcore: registered new interface driver hub
[ 0.740000] usbcore: registered new device driver usb
[ 0.750000] Switching to clocksource kw_clocksource
[ 0.750000] NET: Registered protocol family 2
[ 0.750000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.750000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.750000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.750000] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.750000] TCP reno registered
[ 0.750000] NET: Registered protocol family 1
[ 0.750000] RPC: Registered udp transport module.
[ 0.750000] RPC: Registered tcp transport module.
[ 0.750000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.750000] Trying to unpack rootfs image as initramfs...
[ 0.750000] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 0.750000] Freeing initrd memory: 692K
[ 0.750000] XOR registered 4 channels
[ 0.750000] XOR 2nd invalidate WA enabled
[ 0.760000] VFS: Disk quotas dquot_6.5.2
[ 0.760000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.760000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.760000] NTFS driver 2.1.29 [Flags: R/O].
[ 0.760000] aufs 2-standalone.tree-32-20100419
[ 0.760000] msgmni has been set to 245
[ 0.760000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.760000] io scheduler noop registered
[ 0.760000] io scheduler anticipatory registered (default)
[ 0.780000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.780000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[ 0.790000] console [ttyS0] enabled
[ 0.790000] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
[ 0.810000] brd: module loaded
[ 0.810000] Loading Marvell Ethernet Driver:
[ 0.810000] o Cached descriptors in DRAM
[ 0.820000] o DRAM SW cache-coherency
[ 0.820000] o 2 Giga ports supported
[ 0.830000] o Single RX Queue support - ETH_DEF_RXQ=0
[ 0.830000] o Single TX Queue support - ETH_DEF_TXQ=0
[ 0.840000] o TCP segmentation offload (TSO) supported
[ 0.840000] o Receive checksum offload supported
[ 0.850000] o Transmit checksum offload supported
[ 0.850000] o Rx descripors: q0=128
[ 0.860000] o Tx descripors: q0=532
[ 0.860000] o Loading network interface(s):
[ 0.870000] o register under mv88fx_eth platform
[ 0.870000] o eth0, ifindex = 2, GbE port = 0
[ 0.880000] o eth0, phy chipid = 1410e40, Support WOL = 0
[ 0.880000]
[ 0.880000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.890000] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 0.900000] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 0.930000] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 0.950000] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 0.950000] usb usb1: configuration #1 chosen from 1 choice
[ 0.960000] hub 1-0:1.0: USB hub found
[ 0.960000] hub 1-0:1.0: 1 port detected
[ 0.970000] Initializing USB Mass Storage driver...
[ 0.970000] usbcore: registered new interface driver usb-storage
[ 0.980000] USB Mass Storage support registered.
[ 0.980000] usbcore: registered new interface driver hiddev
[ 0.990000] usbcore: registered new interface driver usbhid
[ 0.990000] usbhid: v2.6:USB HID core driver
[ 1.000000] TCP cubic registered
[ 1.000000] NET: Registered protocol family 17
[ 1.010000] Waiting 10sec before mounting root device...
[ 1.290000] usb 1-1: new high speed USB device using orion-ehci and address 2
[ 1.440000] usb 1-1: configuration #1 chosen from 1 choice
[ 1.440000] hub 1-1:1.0: USB hub found
[ 1.450000] hub 1-1:1.0: 4 ports detected
[ 1.450000] Got empty serial number. Generate serial number from product.
[ 1.730000] usb 1-1.1: new high speed USB device using orion-ehci and address 3
[ 1.860000] usb 1-1.1: configuration #1 chosen from 1 choice
[ 1.870000] scsi0 : SCSI emulation for USB Mass Storage devices
[ 1.880000] usb-storage: device found at 3
[ 1.880000] usb-storage: waiting for device to settle before scanning
[ 1.960000] usb 1-1.3: new high speed USB device using orion-ehci and address 4
[ 2.070000] usb 1-1.3: configuration #1 chosen from 1 choice
[ 2.070000] hub 1-1.3:1.0: USB hub found
[ 2.080000] hub 1-1.3:1.0: 2 ports detected
[ 2.080000] Got empty serial number. Generate serial number from product.
[ 2.360000] usb 1-1.3.1: new high speed USB device using orion-ehci and address 5
[ 2.490000] usb 1-1.3.1: configuration #1 chosen from 1 choice
[ 2.490000] scsi1 : SCSI emulation for USB Mass Storage devices
[ 2.500000] usb-storage: device found at 5
[ 2.500000] usb-storage: waiting for device to settle before scanning
[ 2.600000] usb 1-1.3.2: new high speed USB device using orion-ehci and address 6
[ 2.740000] usb 1-1.3.2: configuration #1 chosen from 1 choice
[ 6.880000] scsi 0:0:0:0: Direct-Access Synology USBstation 1.0 PQ: 0 ANSI: 2
[ 6.880000] drivers/scsi/sd.c (2274) Got USB disk
[ 6.890000] usb-storage: device scan complete
[ 6.890000] sd 0:0:0:0: [synoboot] 250880 512-byte logical blocks: (128 MB/122 MiB)
[ 6.900000] sd 0:0:0:0: [synoboot] Write Protect is off
[ 6.900000] sd 0:0:0:0: [synoboot] Mode Sense: 00 00 00 00
[ 6.900000] sd 0:0:0:0: [synoboot] Assuming drive cache: write through
[ 6.910000] sd 0:0:0:0: [synoboot] Assuming drive cache: write through
[ 6.920000] synoboot: synoboot1 synoboot2 synoboot3
[ 7.020000] sd 0:0:0:0: [synoboot] Assuming drive cache: write through
[ 7.020000] sd 0:0:0:0: [synoboot] Attached SCSI disk
[ 7.500000] scsi 1:0:0:0: Direct-Access SAMSUNG UFD 1100 PQ: 0 ANSI: 0 CCS
[ 7.500000] drivers/scsi/sd.c (2274) Got USB disk
[ 7.510000] sd 1:0:0:0: [sdk] 15532032 512-byte logical blocks: (7.95 GB/7.40 GiB)
[ 7.520000] usb-storage: device scan complete
[ 7.520000] sd 1:0:0:0: [sdk] Write Protect is off
[ 7.520000] sd 1:0:0:0: [sdk] Mode Sense: 43 00 00 00
[ 7.520000] sd 1:0:0:0: [sdk] Assuming drive cache: write through
[ 7.530000] sd 1:0:0:0: [sdk] Assuming drive cache: write through
[ 7.540000] sdk: sdk1
[ 7.540000] sd 1:0:0:0: [sdk] Assuming drive cache: write through
[ 7.550000] sd 1:0:0:0: [sdk] Attached SCSI removable disk
[ 11.020000] RAMDISK: gzip image found at block 0
[ 11.260000] VFS: Mounted root (ext2 filesystem) on device 1:0.
[ 11.400000] VFS: Mounted root (squashfs filesystem) readonly on device 135:241.
[ 11.410000] Trying to move old root to /initrd ... okay
[ 11.420000] Freeing init memory: 112K
[ 11.610000] kjournald starting. Commit interval 5 seconds
[ 11.620000] EXT3 FS on synoboot3, internal journal
[ 11.620000] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.670000] aufs test_add:248:mount[378]: uid/gid/perm /volume1 0/0/0777, 0/0/0755
[ 12.000000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.010000] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 12.560000] alg: No test for stdrng (krng)
[ 12.660000] ocf: module license 'BSD' taints kernel.
[ 12.670000] Disabling lock debugging due to kernel taint
[ 12.760000] cesadev_init(bf0c4000)
[ 12.820000] mvCesaInit: sessions=10240, queue=64, pSram=f0000000
[ 13.170000] fuse init (API version 7.13)
[ 13.610000] NET: Registered protocol family 10
[ 13.620000] lo: Disabled Privacy Extensions
[ 13.670000] synobios: load, major number 201
[ 13.680000] Brand: Synology
[ 13.680000] Model: DS-011j
[ 13.860000] eth0: mac address changed
[ 15.870000] eth0: started
[ 15.870000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 35.600000] rtusb init --->
[ 35.620000] usbcore: registered new interface driver rt2870
[ 35.970000] FAT: nls_disk load default table
[ 35.980000] FAT: nls_io load default table
[ 38.250000] 0x1300 = 000a4360
[ 48.440000] usbcore: registered new interface driver usblp
[ 48.680000] ra0: no IPv6 routers present
[ 154.920000] usbcore: registered new interface driver snd-usb-audio
[ 162.920000] findhostd uses obsolete (PF_INET,SOCK_PACKET)
[ 176.410000] Unhandled msg num 00005202
접기